A little more progress made on the pop top.
I started off filling the joins in the front of the roof to stop leaks and make it slightly more aerodynamic.
I also drilled holes for mounting the rear lights and vent.
Sanded and refilled.
Primed with etch primer aerosol first, and then a few layers of rolled-on grey primer.
Painted – this was done with 3 coats of black Rustoleum Combi-Colour, thinned down by about 20% and then rolled on. It’s a little orange-peely, and some more flatting back and machine polishing would have given a much better result. But, well, this project is too far behind!
Lights in place.